Valves By action and use
Classification editor
By action and use
(1) truncated categories: such as gate valve, globe valve, plug valve, ball valve, butterfly valve, needle valve, diaphragm valve.
Truncated valves, also known as closed-circuit valves, cut-off valve, its role is to turn on or cut off the medium in the pipeline.
Check valve, also known as check valve or check valve, check valve is an automatic valve, its role is to prevent the pipeline in the medium back to prevent the pump and drive motor reversal, and container media leakage. Water pump off the end of the valve also belong to the check valve class.
Explosion-proof valve, the accident valve, the role of the safety valve is to prevent the pipeline or device in the medium pressure exceeds the specified value, so as to achieve the purpose of security protection.
Regulating valve, throttle valve and pressure reducing valve, its role is to adjust the medium pressure, flow and other parameters.
(2) vacuum categories: such as vacuum ball valve, vacuum baffle valve, vacuum inflatable valve, pneumatic vacuum valve. Its role is in the vacuum system, used to change the direction of the air flow, adjust the size of the air flow, cut off or turn on the vacuum system components called the vacuum valve.
(3) special purpose categories: such as purifier valve, vent valve, sewage valve, exhaust valve, filter and so on.
Exhaust valve is essential in the pipeline system auxiliary components, widely used in boilers, air conditioning, oil and gas, water supply and drainage pipes. Often installed in the high point or elbow, etc., to exclude excess gas in the pipeline to improve the efficiency of pipeline use and reduce energy consumption.
According to the main parameters
According to nominal pressure
(1) vacuum valve: refers to the working pressure below the standard atmospheric pressure of the valve.
(2) low pressure valve: refers to the nominal pressure PN ≤ 1.6Mpa the valve.
(3) medium pressure valve: refers to the nominal pressure PN 2.5Mpa, 4.0Mpa, 6.4Mpa the valve.
(4) high pressure valve: refers to the nominal pressure PN is 10.0Mpa ~ 80.0Mpa the valve.
(5) ultra-high pressure valve: refers to the nominal pressure PN ≥ 100.0Mpa the valve.
According to the working temperature
(1) ultra-low temperature valve: for the media operating temperature t <-101 ℃ valve.
(2) Room temperature valve: for the medium operating temperature -29 ℃ <t <120 ℃ valve.
(3) temperature valve: for the media operating temperature 120 ℃ <t <425 ℃ valve.
(4) high temperature valve: for the medium operating temperature t> 425 ℃ valve.
By way of drive
According to the drive classification is divided into automatic valve type, power-driven valve and manual valve class
Compressed air-driven valves. A valve that is driven by liquid pressure such as oil.
In addition there are several combinations of drive methods, such as gas - electric valves and so on.
